Electronic power combination lock
9510 work manual
Dimension:125*60*20mm
Colour:Silver(vertical type)
Battery install:
For your first use, please insert emergency power(9V) into DC9V socket. Press 0 button, then press OK button, when you hear a long "di" sound, rotate the knob clockwise from "LOCK" position to "OPEN" position to open the door.
When the door is opened, please install 4 pieces double A batteries (No.5 battery) into the battery holder inside the cabinet. Then remove the emergency power supplier for backup.
How to set new password:
Passwords can be consisted of 1-15 digits,and it can be long-term preservation under power failure condition.
When your first time to set up a new password, please press "0" button(factory defaulted pass word is "0") press "C" buttonpress the new password (e.g. 12345678)press "OK" button. Then the buzzer will emit a long "di" sound, which means the new password come into force.
Summary of new password setting:press the old passwordpress "C" button press new passwordpress "OK" button new password comes into force.
How to open the door:press passwordpress "OK" button Rotate the knob.
When you press password on the keyboards, every time you press a number, the buzzer will emit "di" and at the same time the indicator light shines, that means the input is valid. After pressing the password, please press "OK" button. If the password pressed in correct, the indicator light will be on and buzzer will emit a long "di" sound. Then you can rotate the knob clockwise from "LOCK" position to "OPEN" position to open the door. If you don't rotate the knob before the indicator light turns off, it needs to press the password again to open the lock. If the password is wrong, the buzzer will emit two "di di" sound, please press the right pass.
How to lock the door:
Rotate the knob anti-clockwise from "OPEN" position to "LOCK" position to lock the door..
Automatic alarm device:
If there are 4 times consecutive input errors,lock will give out the alarm, which will continue for +0 seconds. During these 60 seconds,if you press the correct password, the alarm will stop. This function can prevent others to crack the password.
The electricity shortage prompt:
When electricity is shortage, the buzzer will emit three "di di di" sound. But you still can operate the lock
around 300 time since the lock emit three "di di di" prompt from the first time. Please prepare and change
the battery as soon as possible. (Generally, ordinary zinc-manganese batteries are available for about
one year, ordinary alkaline batteries are available for about 2 years.)
The use of emergency power:
If the lock can't be opened due to the electricity shortage,please insert emergency power(9V) into DC9V socket to open the lock, then please change the battery immediately. Please remove emergency power once the door is opened, otherwise the battery will be depleted within 24 hours.
Emergency decoding:
If you forget the password, please contact your direct supplier for decoding (master password). Once the lock is open, please press the RESET button at the back of lock. When the buzzer emit a long "di", it means the lock succeed to restore to factory password "0" .